FAG 3319 -M Angular Contact Ball Bearing - 95 mm ID, 200 mm OD, 77.8 mm Width, Normal Impact Resistant The bell-shaped ball joint puller

The bell-shaped ball joint puller of series 128 is used to press out the ball studs when removing ball joints and tie rod ends on tie rods in automotive and industry applications

Drive: ¼" hexagon

Bit socket with 1/4" drive and holding function for particularly comfortable screwdriving with reduced risk of losing the screw when feeding it into the workpiece

Series 212 is affordable and compact

while still offering strong protection in wet or high-load conditions

FAG 3319 -M Angular Contact Ball Bearing - 95 mm ID, 200 mm OD, 77.8 mm Width, Normal Impact Resistant The bell-shaped ball joint pullerAngular Contact Ball Bearing Angular Contact Ball Bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. They are designed to accommodate combined loads. Manufactured to precision tolerance class for demanding applications. Suitable for use in a wide range of industrial applications where reliability and performance are essential.