Klippe T case and plate foam set Style:3mm plate 3mm case we STRONGLY suggest choosing 3mm

we STRONGLY suggest choosing 3mm plate foam

The case foam keeps enough upward pressure on the PCB/plate assembly that the points at which the plate is gasket mounted actually do NOT touch the bottom of the gasket area (without the gasket) under normal typing conditions and

Hotswap Split Backspace:  Supports the standard Tsangan Hotswap PCB with split backspace

Case and plate foam for the DevastatingTKL by Cannon Keys

7u spacebar version supports 1

Klippe T case and plate foam set Style:3mm plate 3mm case we STRONGLY suggest choosing 3mmCase and plate foam for the Klippe T keyboard by Mekanisk 3mm plate foam 2mm or 3mm case foam we suggest using 2mm if using a hotswap PCB, and 3mm if using a solder PCB. Note: We chose to offer 3mm plate foam given the use of a WT60 D WeirdFlex as the stock solder build. However, if you are after a firmer typing feel, we're happy to cut the plate foam out of 4mm upon request. Just reach out to us before you order.